NEW VORTEX RKF and RVZ

Mon, 28 Jan 2013 15:46:45 -0500

Vortex RKF (KF, KF Junior category), Homologation no. CIK FIA 4/M/21
The new homologated CIK FIA Vortex engine which will face the next three years of international competitions in KF categories is called RKF.
The new RKF project introduces top-level technological innovations and is the outcome of an accurate and in-depth work carried out by Vortex during the last years.
RKF Engine technical features Homologation no. CIK FIA 4/M/21
Single cylinder 2-stroke engine with reed valve induction in the crankcase
Displacement: 124,96cc
Mixture lubricated (with Petronas Rok Lube)
Liquid-cooled with integrated water pump
Digital ignition
Electric starter
Balancer shaft
Valve exhaust (KF2)
Monolith centrifugal dry clutch
Bore-stroke 54 X 54 mm
Number of transfer ducts: 5/5
Exhaust ports: 3
Maximum rpm: 15.000 Rpm (KF), 14.000 Rpm (KFJunior) electrically limited

Vortex RVZ (KZ1 and KZ2 categories), Homologation no. CIK FIA 5/M/21
RVZ is the new CIK FIA homologated Vortex engine for the gearbox categories. This engine is the result of the great work done by Vortex Technical department using all the best knowledge and technologies at its disposal.
RVZ Engine technical features, Homologation no. CIK FIA 5/M/21
Single cylinder 2-stroke engine with six-speed gearbox
Displacement: 124,84 cc
Nicasil cylinder
PVL Analog Ignition
Mixture lubricated (with Petronas Rok Lube)
External pump liquid-cooled system
Dell’Orto VHSH carburettor Ø30mm diameter
Intake reed valve in the crankcase
Number of transfer ducts: 5/3
Bore-stroke 54 x 54,45 mm
Front clutch gear shift
Dry clutch
Oval exhaust with 2 boosters
C4 radial-bearings
Ring with special coating
New-generation homologated exhaust
Machined conrod 115mm
New-generation Asso piston with special coating

EVS Sports Releases New Cell Riding Gloves

Mon, 19 Nov 2012 07:47:27 -0500

Rancho Dominguez, CA - EVS Sports, the industry leader in protective gear, is proud to unveil rider gloves for 2013. Influenced by life at the track, the new Cell riding glove seamlessly blends functionality and comfort with incredible design.
Available now, the 2013 Cell riding glove gives riders both ends of the spectrum; a great looking glove that functions just as good. The Cell Riding Glove features:
- Lightweight Breathable 4-way stretch upper construction
- Bold sublimated graphics
- Vented knuckle expansion gussets
- Reinforced dual layered synthetic leather palm- Pre-curved fingers for improved fit and reduced bunching
- Full Grain leather thumb patch
- Gripper Silicone Print on palm and fingers
- TPR hook & Loop wrist closure
- Packaging includes 1 pair of EVS Grip Donuts
- $35.00

The Cell riding glove is available at www.evs-sports.com. The 2013 EVS riding gloves range from $20.00-$49.00. View the whole line of EVS Riding Gloves here.
About EVS Sports Founded in 1985, EVS Sports continues to be the leading innovator of Motocross and Street bike protective gear. Originally established as a motocross specific knee brace manufacturer, it all started with the AMX-5. What started out as one knee brace has evolved into an extensive line of knees braces, neck supports, helmets, chest/back protection and a long list of protective gear to keep riders safe on the track or the street. For more information on EVS Sports, please visit www.evs-sports.com ; or find us on Twitter.com/evssport and Facebook.com/evssports.

INFERNO CLUTCH FOR BRIGGS AVAILABLE IN CANADA

Wed, 30 May 2012 13:17:51 -0400

Extreme Kart Racing Inc. and East Coast Karting are the new Canadian distributors

Looking to bring a competitive and affordable clutch to the Canadian Briggs & Stratton karting market, Extreme Kart Racing Inc. of Winnipeg, Manitoba and East Coast Karting of Moncton, New Brunswick have joined forces to become the Canadian importers for the Inferno Clutch product line. Wanting to provide a clutch equal or better than the current industry standard while focusing on performance and pricing, the Inferno Clutch rose to the top after in depth dyno and track testing were conducted over the past six months.

"We realized that there was an issue when the Briggs & Stratton motor came to the Canadian karting scene and the clutch was half the value of the complete engine package," expressed Extreme Kart Racing's Brian Campbell. "We worked hard to find a clutch with superior performance and reliability that could withstand the torque of the LO 206 engine."

Not wanting to become the distributors of a product that would not be reliable, Campbell as well as East Coast Karting's Gerald Caseley, went to work over the long, cold winter months. Importing and testing multiple different clutch brands and designs, the Inferno Clutch outdid them all.

"We were very impressed with the results on the dyno," expressed Gerald Caseley. "Knowing that we could not rely solely on the dyno performance, we waited until Mother Nature would provide us with the weather to perform an on track test. Again, we were very pleased with the results but wanted to see the clutch in wheel-to-wheel action."

Campbell continued, "Once we saw the Inferno Clutch in real competition, we were sold on the idea and design as well as excited about the opportunity to present the Briggs & Stratton community with a high end, top quality clutch at a very affordable price."

The Inferno brand racing clutches are engineered to last longer and provide more consistent torque than conventional drum style racing clutches. The clutch shoes are thermo-dynamically designed to minimize heat transfer to the springs. This allows the clutch to handle the heat generated from the clutch without damage to the springs.

The Inferno Clutch racing drum is stamped and machined to a tight tolerance on the inside diameter to ensure even contact between the shoe surface and the drum for consistent engagement and torque. The Inferno Racing clutch series can be adjusted without removing the chain. Quick-change springs allow less time making adjustments in the pits and more time on the track. Sprockets and springs are interchangeable between the Fury, Flame and the Blaze models. Designed for dirt or asphalt, oval or road courses, Inferno clutches are track tested and proven winners.

Providing clutches for a variety of different disciplines, the Inferno Clutch for the karting market is sure to not disappoint.

While Extreme Kart Racing and East Coast Karting are the distributors for the product line throughout Canada, and will both supply a full line of Inferno clutches, parts and accessories, both companies are actively seeking dealers to add to their dealership network. Interested parties are asked to contact their local distributor. Brian Campbell of Extreme Kart Racing Inc. can be reached at 204.228.1415 or via email at extkartracing@mymts.net while East Coast Karting and Gerald Caseley can be contacted at 506.874.3251 or via email at eastcoastkarting@gmail.com.

Inferno Racing Clutches are manufactured by the Hilliard Corporation. Hilliard is a family owned company that has been manufacturing a large line of motion control products in Upstate New York since 1905. More information on the Inferno Racing Clutches can be found at www.infernoclutch.com.

Briggs & Stratton 4T Full Synthetic Racing oil custom blended by AMSOIL

Mon, 9 Apr 2012 09:06:02 -0400

As a racer you put a lot of time and effort into doing what you love. Your engine is the heart of what becomes your fastest lap, a successful pull, or your lowest E.T. of the year. With your engine playing such a critical role in your success, what do you really know about the oil you use?
‘Oil is the life blood of our engines’ stated David Klaus – Director, Briggs & Stratton Racing. ‘Where we can engineer an engine for the rigors of racing, hand build it to insure the highest quality on the market today, we cannot control the choice of oil you use. Many of today’s industry standards come with significant compromises that most racers are simply unaware of until it’s too late.’
What-if there was an oil available that combines the speed and horsepower of lite oil and gave you the protection of heavy oil? An oil that requires less oil changes and gave you better protection over time with the added benefits of rust, corrosion, and wear inhibitors? An oil designed for the fuels we use and the elevated temperatures that high revving, air-cooled engines live in? Lastly, what-if it was made by a leader in synthetic racing oils and done in collaboration with the largest manufacturer of small engines in the world?
Introducing Briggs & Stratton 4T Full Synthetic oil customer engineered by AMSOIL. No more what-if’s, no more compromises.
Ask for Briggs & Stratton 4T Full Synthetic Racing Oil at your Briggs & Stratton Racing source of supply.

MRP Motorsport Becomes US Distributor for IMAF Racing Seats

Mon, 9 Apr 2012 08:51:06 -0400

Popular seat choice among international racers being made available to public

THREE OAKS, MI – MRP Motorsport was recently announced as the United States Distributor for IMAFRacing Seats, a leader in kart racing seats worldwide. With this announcement, a large range of IMAF seats will be available through a large list of participating MRP Motorsport dealers throughout the country.

“IMAF Racing Seats have become the OEM standard for several karting manufacturers over the years,” said Marc Miller, Director of Brand Development for MRP Motorsport. “We are happy to announce the ability to also showcase their performance line of “silver” and extra soft seats that have proven to be an added adjustment for karting’s premier karting events.”

The large range of seats and sizes are also available via MRP’s online store at http://www.nexternal.com/mrp/imaf-seats-c79.aspx

For more information regarding MRP Motorsport, Birel or the MRP-Birel AMERICA race program, call (269-756-9133) or contact us online at www.mrpmotorsport.com. Information regarding the Birel chassis line may be found at www.BirelAmerica.com.

OMP SAYS, MAKE IT YOURSELF!

Fri, 9 Mar 2012 08:14:57 -0500

The folks at OMP racing apparel have added an amazing feature to their website that allows you to design your own custom boots and gloves online! It’s really quite impressive, and made us want a whole new look. Check it out for yourself at http://shop.ompracing.it/en/shoes

NEW K'NEX Mario Kart Wii Products

Fri, 2 Mar 2012 10:37:29 -0500

Brought to you by K’NEX, the next generation of construction sets, is the new Mario Kart Wii construction set. It inspires creativity, builds self-confidence and encourages interaction among children and parents. The possibilities are endless! Watch the demo video to find out more!

K1 Racegear’s New Racing Jackets

Thu, 1 Mar 2012 07:59:13 -0500

K1 RaceGear is proud to announce a new addition to their line-up of products with the all new kart racing jacket designed for all forms of karting. From Arrive and Drive, to Dirt and Asphalt oval racing, TAG and Shifter drivers, even Vintage kart drivers will benefit from this all new design. Made from CIK/FIA approved level 2 Cordura material, with suede leather on the back in the shoulder area, and on the back of the arms for added protection from debris. The jacket also features additional padding in the right elbow area to aid in driver comfort from engine heat when sitting in a kart. The jacket also features 360 degree arm gussets allowing for a full range of arm motion, and the all new heavy duty zipper that is found in all of our newest kart racing suit designs which gives more durability.

MSRP - 89.00
Sizes - 7XS - XXXL
Color - All Black
These are available through your favorite K1 RaceGear dealer or direct by calling 888-514-3277 or by visiting http://www.k1racegear.com/k1-kart-racing-jacket.html